Ready to Assemble Bar Room Cabinets

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 4.5" | Depth 27/32"

Crown molding with egg and dart detail. Installed height will be 3 5/8" and installed depth will be 2 27/32" (how far out it will extend from the cabinet).

Width 14 3/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 30" base cabinet or sink base cabinet.

Width 16 1/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 33" base cabinet or sink base cabinet.

Width 17 3/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 36" base cabinet or sink base cabinet.

Width 24" | Height 34.5" | Depth 24"

2 door sink base cabinet that comes with 1 false drawer front and no shelves or center stile. This cabinet does have a full 1/2" back.

Width 30" | Height 30" | Depth 12"

Wall blind corner cabinet with a max pull of 3" from the corner, meaning it will take up anywhere between 30" and 33" of wall space. The cabinet has 2 shelves and 1 door that is approximately 14" wide. The cabinet will initially have 2 doors, upon assembly, remove the door that's not needed and then a 6" filler will be installed in the middle of the cabinet to act as the stile (the filler will be included).

Width 30" | Height 36" | Depth 12"

Wall blind corner cabinet with a max pull of 3" from the corner, meaning it will take up anywhere between 30" and 33" of wall space. The cabinet has 2 shelves and 1 door that is approximately 14" wide. The cabinet will initially have 2 doors, upon assembly, remove the door that's not needed and then a 6" filler will be installed in the middle of the cabinet to act as the stile (the filler will be included).

Width 30" | Height 42" | Depth 12"

Wall blind corner cabinet with a max pull of 3" from the corner, meaning it will take up anywhere between 30" and 33" of wall space. The cabinet has 3 shelves and 1 door that is approximately 14" wide. The cabinet will initially have 2 doors, upon assembly, remove the door that's not needed and then a 6" filler will be installed in the middle of the cabinet to act as the stile (the filler will be included).

Width 33" | Height 84" | Depth 24"

Oven cabinet with 2 doors on top of the oven opening and 1 drawer on bottom. The oven opening measurements are as follows: 42"H x 24"W. The doors will match the height of the doors on a 33x15 wall cabinet and the drawer front will measure 11-1/4"H x 33" W. The cutout can be widened on site to a maximum width of 30", and height of 53", if needed.

Width 33" | Height 90" | Depth 24"

Oven cabinet with 2 doors on top of the oven opening and 1 drawer on bottom. The oven opening measurements are as follows: 42"H x 24"W. The doors will match the height of the doors on a 33x18 wall cabinet and the drawer front will measure 11-1/4"H x 33" W. The cutout can be widened on site to a maximum width of 30", and height of 53", if needed.