Pre-Assembled Bathroom Vanities

Width 6" | Height 36" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 6 cubes that will have finished interiors.

Width 6" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 6" | Height 42" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" wall filler must be ordered separately.

Width 6" | Height 42" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 7 cubes that will have finished interiors.

Width 6" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 3" | Height 84" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 9" | Height 34.5" | Depth 24"

1 full height door base cabinet with no shelves.

Width 9" | Height 30" | Depth 24"

Spice pull out that comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. 9" base cabinet must be ordered separately.

Width 3" | Height 90" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 96" | Height 5.5" | Depth .75"

Straight valance.

Width 3" | Height 96" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 23.25" | Height 96" | Depth .25"

Tall skin that can be cut to size as needed.