Ready to Assemble Office Cabinetry

Width 25-5/16" | Height 35-1/4" | Depth 3/4"

Base overlay panel to be used on the exposed side of a base cabinet, 24” deep wall cabinet or next to an appliance. The panel will be edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 96" | Height 42" | Depth 3/4"

Finished panel, edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Touch up kit that will include one finish pen, one fill stick (crayon), one white synthetic pad and a small scrub pad. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 15" | Height 22-5/8" | Depth 3/4"

Wall overlay panel to be used on the exposed side of a 23" high wall cabinet that’s no more than15” deep. The panel will be edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 15" | Height 30-1/4" | Depth 3/4"

Wall overlay panel to be used on the exposed side of a 30" high wall cabinet. The panel will be edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 15" | Height 35-1/4" | Depth 3/4"

Wall overlay panel to be used on the exposed side of a 35" high wall cabinet. The panel will be edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 15" | Height 40-1/4" | Depth 3/4"

Wall overlay panel to be used on the exposed side of a 40" high wall cabinet. The panel will be edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 120" | Height | Depth 3/4"

Edgebanding that will come in a 10' roll and will match the sized edges on the cabinet box, doors, panels and fillers. Edgebanding can be applied to the edge of a cabinet box so it matches the door finish instead of the grey linen finish of the cabinet box edging. It can be applied right on the outside of the cabinet box edges using glue. The edgebanding can also be used to cover the edge of any panels or fillers that have been trimmed. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 12" | Height 34-1/2" | Depth 24"

2 drawer base cabinet with 14-7/8" high drawer fronts. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 12" | Height 34-1/2" | Depth 24"

2 drawer base cabinet with 1 inner drawer behind the top drawer. The inner drawer is 4" high (top of the drawer box to the drawer box floor). The inner drawer is 4" high (top of the drawer box to the drawer box floor). *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 12" | Height 27-1/8" | Depth 24"

2 drawer desk base cabinet. The top drawer front is 7-1/2" high and the bottom drawer front is 14-7/8" high. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 12" | Height 34-1/2" | Depth 21"

2 drawer vanity base cabinet with 14-7/8" high drawer fronts. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*