Shale Grey Shaker

Width 30" | Height 42" | Depth -

Set of mullion doors for a 30"W x 42"H wall cabinet that will match the door style of the cabinet and has plain glass. The glass is also included.

Width 36" | Height 30" | Depth -

Set of mullion doors for a 36"W x 30"H wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width 36" | Height 36" | Depth -

Set of mullion doors for a 36"W x 36"H wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width 36" | Height 42" | Depth -

Set of mullion doors for a 36"W x 42"H wall cabinet that will match the door style of the cabinet and has plain glass. The glass is also included.

Width - | Height 30" | Depth -

Glass door for a 24"W x 30"H diagonal corner wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width - | Height 36" | Depth -

Glass door for a 24"W x 36"H diagonal corner wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width - | Height 42" | Depth -

Glass door for a 24"W x 42"H diagonal corner wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width 42" | Height 96" | Depth .75"

Plywood edge banded panel that is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.

Width 30" | Height 15" | Depth -

Plate rack that holds 10 plates and can also be installed under a shorter wall cabinet.

Width 24" | Height 96" | Depth -

Refrigerator end panel that has a 1/2" thick panel with a 1-1/2"W filler on the front. This refrigerator end panel can be trimmed to desired height and may be used either left or right. This panel comes finished on both sides.

Width 30" | Height 7.5" | Depth 21"

Under counter/knee drawer that can be bumped out with 2x4's if being used with 24" deep cabinets. This is designed to be installed under counter to create a desk area between either vanity cabinets (21" depth) or standard base cabinets (24" depth). The overall width is 30" which can be trimmed if necessary (up to 1-1/2" on each side). Actual drawer front width is about 24".

Width 36" | Height 7.5" | Depth 21"

Under counter/knee drawer that can be bumped out with 2x4's if being used with 24" deep cabinets. This is designed to be installed under counter to create a desk area between either vanity cabinets (21" depth) or standard base cabinets (24" depth). Overall width is 36" which can be trimmed if necessary. Actual drawer front width is about 30".