Countertops

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 6" | Height 34.5" | Depth 0.75"

Fluted decorative base filler with rosette. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 4.5" | Height 96" | Depth -

Crown molding that comes in an 8 foot strip. Commonly used to finish the top of wall cabinets.

Width 3" | Height 9" | Depth 6"

Large decorative corbel.

Width 24" | Height 12" | Depth 12"

Small 2 door wall cabinet. This cabinet does not have a center stile or shelves. This cabinet is commonly placed above the range, refrigerators, wine racks, plate racks, or above the sink (if no window is present), it can also be utilized in other areas.

Width 36" | Height 34.5" | Depth 24"

1 door corner cabinet that takes up 36" of wall space from the corner out, on each wall. This cabinet comes with 1 fixed shelf.

Width 24" | Height 15" | Depth 12"

Small 2 door wall cabinet. This cabinet does not have a center stile or shelves. This cabinet is commonly placed above the range, refridgerators, wine racks, plate racks, or above the sink (if no window is present), it can also be utilized in other areas.

Width 24" | Height 42" | Depth 12"

Wall corner cabinet with a 90 degree, bi-fold door. The cabinet will have 3 shelves. It will take up 24" of wall space out from each corner.

Glass door for a wall cabinet that is 18" wide and 42" high. Frosted glass is included. The actual cabinet must be purchased separately.

Width 18" | Height 96" | Depth 24"

Wall pantry cabinet with 2 doors, 1 smaller door on top and 1 larger door on bottom. This pantry cabinet comes with 1 fixed shelf and 6 adjustable shelves. Measurements are as follows: Top/Middle/Bottom door width = 17 9/16". Top door height = 41 5/16". Middle/Bottom door height = 49 1/4".

Decorative panel for the side of a 24" deep by 90" high cabinet or accessory (pantry cabinet, oven cabinet, refrigerator panel, etc...). Comes as a 2 piece door set.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Width 24" | Height 96" | Depth 0.75"

Refrigerator panel that has a 3" return. This panel will be finished on one side and the front edge.