Midtown Blue Shaker

Trash can pullout for a 21" full height door base cabinet (which must be purchased separately) *if using with a 21” cabinet with a drawer, see sku TC21-BLUM*. The pullout will have Tandem plus Blumotion full extension, concealed drawer glides. Two 50-quart trash cans will be included. Not for ADA cabinet use.

Width 6” | Height 30” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 36” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 42” | Depth 12”

Open end wall cabinet with 3 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 30” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 36” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 42” | Depth 12”

Open end wall cabinet with 3 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 23-1/2" | Height 14-1/2" | Depth 24"

Wainscot panel for a 15" high, 24" deep cabinet. This panel is a great option when stacking a 15" high wall cabinet with an increased depth, above a pantry or oven cabinet.

Width 3/4" | Height 34.5" | Depth 24"

Appliance end panel that finished on two sides and edge-banded on 2 vertical (34-1/2”) edges, there will not be a front stile on this panel.

Width 11-3/4" | Height | Depth

Set of 2 wainscot panels to be used on the exposed side of an 84"W x 12"D pantry cabinet. It will match the door style of the cabinets being ordered.

Width 11-3/4" | Height | Depth

Set of 2 wainscot panels to be used on the exposed side of an 90"W x 12"D pantry cabinet. It will match the door style of the cabinets being ordered.

Width 11-3/4" | Height | Depth

Set of 2 wainscot panels to be used on the exposed side of an 96"W x 12"D pantry cabinet. It will match the door style of the cabinets being ordered.