Phoenix Cream Glaze Sample Door

The creamy-white raised center door panels of the Phoenix Cream Glaze collection offers a traditional yet fresh addition to any space. These cabinets are all about quality with soft close, full extension drawer glides, and plywood box construction. Pair with the Phoenix Caramel Glaze collection to add dimension and a pop of color for a stand-out kitchen!

Sample Door Shipping Time:	Samples ship out same day before 12pm Mon-Fri. After 12pm samples will ship out the next business day
Shop this RTA Style:	Click here to shop cabinets from this style
Matching Collections:
Cabinetry Shipping Time:	Ships in 5-15 business days
Style:	Raised
Face Frame:	3/4" x 1-1/2" solid wood
Door Frame:	Solid Maple or Birch
Door Center:	MDF
Sides:	1/2" plywood
Top & Bottom (Wall):	1/2" plywood
Bottom (Base):	1/2" plywood
Back Panel:	3" wide x 3/4" thick picture frame back with 1/4" plywood center
Shelves:	3/4" plywood, adjustable, metal shelf rests
Base Cabinet Shelf Depth:	18"
Drawer Front:	5-piece
Drawer Box:	Dovetail drawer boxes, 1/2" thick solid wood side panels
Drawer Glides:	Full extension, soft closing, undermount glides
Base Corner Supports:	Metal bracket reinforced corners
Overlay:	Full
Hinges:	Soft-close
Cabinet Interior:	Clear coated natural maple interior
Center Stile:	None
Assembly Method:	Screw, glue & staple assembly
Finish:	Polyurethane UV Resistant Finish w/Glaze
Toe Kick:	1/2" thick, edge banded
Installation Rail:	3/4" thick x 1-1/2" wide
CARB Compliant:	Yes
Door Hinges:	Hinged right by default, doors can be flipped for a left hinge orientation (hinge holes may need to be drilled onsite)
Side Panels Finished:	Yes
Installation/Design Note:	Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/2" space needs to be left (which can be filled with a filler that is cut to size). The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards*

​​