Royal White Shaker Sample Door
In stock
- SKU
- royal-white-shaker-sample-door
Description / Royal White Shaker Sample Door
The specifications below are for the kitchen cabinet associated with this door sample
| Sample Door Shipping Time: | Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day |
| Shop this RTA Style: | Click here to shop RTA Cabinets from this style |
| Cabinetry Shipping Time: |
Ships in 5-7 business days
|
| Style: | Shaker |
| Face Frame: | Solid Birch |
| Door Frame: | Solid Birch |
| Door Center: | MDF |
| Door Frame Width: | 3" |
| Center Panel Beveled Edge: | Yes (slight bevel) |
| Sides: | 1/2" plywood |
| Top & Bottom (Wall): | 1/2" plywood |
| Bottom (Base): | 1/2" plywood |
| Back Panel: | 1/2" plywood |
| Shelves: | 3/4" plywood |
| Base Cabinet Shelf Depth: | 1/2 |
| Drawer Box: | Dovetailed, 5/8" drawer box with 5-piece drawer front |
| Drawer Glides: | Undermount, full extension, soft close drawer glides |
| Base Corner Supports: | Wood corner brackets |
| Overlay: | Full |
| Hinges: | Concealed, 6-way adjustable, soft close hinges |
| Cabinet Interior: | UV coated, natural interior |
| Center Stile: |
None |
| Assembly Method: | Nail/screw/glue: Dovetail box assembly or a dado panel assembly. Tall cabinets will all have a dado assembly w/metal clips (brackets included). Recommend using glue and bradnails for both assembly methods. |
| Finish: | Sherwin Williams Paint |
| Toe Kick: | 1/2" plywood |
| Installation Rail: | 1/2" plywood (1-1/2" narrower than cabinet width) |
| Wall Cabinet Bottoms Finished (Exterior): | Yes (side panel bottom edges will be unfinished) |
| CARB Compliant: | Yes |
| Door Hinges: | Hinged right by default, hinge pilot holes are also pre-drilled on the left side of the face frame. For base cabinets, the hinges from the right side of the face frame can be removed, then screwed into the pilot holes on the left, for a left hinged door. Wall cabinets can have the door flipped around for a left hinge install. |
| Toe Kicks Included w/Base Cabinets: | Yes, however 8' toe kick (TK96) is recommended to be purchased and applied across adjacent cabinets so toe kick seams are not seen. |
| Sides Panels Finished: | Yes |
| Installation/Designer Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
More Information
| Brand | TheRTAStore |
|---|---|
| Cabinet Shipping Time | 1-3 Weeks |
| Product Assembled | RTA |
| RTA Shipping Option | Sample Doors |
| Product Color | White |
| Product Lead Time | Ships in 5 to 15 business days |
| Product Finish | Royal White Shaker |
| Zoho Record ID | 3426375000342512269 |
| Average RTA Kitchen Cost | $2,000 - $3,000 (Based on 10x10 layout) |
