Accessories, Sinks & More

Width 24" | Height 34.5" | Depth 24"

3 drawer base cabinet.

Decorative panel for the side of a 24" deep by 84" high cabinet or accessory (pantry cabinet, oven cabinet, refrigerator panel, etc...). Comes as a 2 piece door set.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Width 24" | Height 96" | Depth 0.75"

Refrigerator panel that has a finished edge and no return. This panel will be finished on both sides and the front edge.

Width 26" | Height 2.875" | Depth 21"

Roll out tray to be used with a 30" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

Width 36" | Height 34.5" | Depth 24"

2 door base cabinet with 2 drawer and 1 shelf. There is no center stile on this cabinet.

Width 36" | Height 34.5" | Depth 24"

2 door sink base cabinet that comes with 2 false drawer front and no shelves or center stile. This cabinet does have a full 1/2" back.

Width 3" | Height 42" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 48" | Height 34.5" | Depth 21"

Bathroom vanity that has 4 doors, 1 drawer on far left, 1 drawer on far right, and a fake drawer front in the middle. There will be no shelves with this cabinet.

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 6" | Height 34.5" | Depth 0.75"

Fluted decorative base filler with rosette. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 4.5" | Height 96" | Depth -

Crown molding that comes in an 8 foot strip. Commonly used to finish the top of wall cabinets.

Width 3" | Height 9" | Depth 6"

Large decorative corbel.