Midtown Timber Shaker

Width 3" | Height 36" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 4 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" wall filler must be ordered separately.

Width 3" | Height 42" | Depth 15"

Wall column that can be trimmed on site if needed.

Width 3" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 42" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 5 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" wall filler must be ordered separately.

Width 3" | Height 96" | Depth 27"

Tall column that can be trimmed on site if needed.

Width 3" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 48" | Height 96" | Depth .5"

Back panel that is made of 1/2" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 96" | Depth .25"

Back panel that is made of 1/4" thick MDF. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 96" | Depth .75"

Back panel that is made of 3/4" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 39" | Height 34.5" | Depth 24"

1 door blind base corner cabinet with 1 drawer and 1 shelf. The actual width is 39", but must be pulled at least 3 1/2" from the corner, taking up 42" of wall space. It can be pulled a max of 9.5", taking up 48" of wall space. The door width is 15 3/8", the stile width is 10-1/4" and the blind opening width is 12 3/4". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately.

Width 42" | Height 12" | Depth .75"

Arched Recessed panel valance that can be trimmed up to 3" on each side.

Width 42" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 40-1/2”
• Front width: 35-7/8”
• Depth of 34-1/2” section: 13-3/4”
• Depth of 29-7/8” section: 4-1/2”
• Max fan size: 40-1/2” x 13-3/4”
• Note that a blower is not included and must be purchased separately