Dakota White

Width 42" | Height 34.5" | Depth 24"

1 door blind base corner cabinet. The actual width is 42" however it will take up a minimum of 45" of wall space and can be pulled up to 48". This cabinet has 1 drawer and is reversible. The door/drawer width is 17-1/2”, blind opening is 14 7/8”. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.

Width 48" | Height 8" and 12" | Depth -

Arched valance with a height of 8" at the shortest point and 12" at the highest.

Width 96" | Height 48" | Depth 0.25"

Finished back panel. Commonly used to finish the back of an island.

Width 6" | Height 34.5" | Depth 0.75"

Base filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 34.5" | Depth 0.75"

Fluted decorative base filler with rosette. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 30" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 42" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 96" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 0.625" | Height 4.5" | Depth 96"

Base board molding that comes in an 8 foot strip. Commonly used as a decorative molding around base cabinets or islands.

Width 96" Height 2.5" Depth .78125"

Crown molding that comes in an 8 foot strip. Commonly used to finish the top of wall cabinets. Once installed, the crown will stick out about 1-5/8" from the cabinet and the height off the cabinet will be about 1-7/8".

Width 4-1/2" | Height 96" | Depth -

Crown molding with rope detail that comes in an 8 foot strip, with rope detail fastened to the molding. Commonly used to finish the top of wall cabinets.

Width 0.75" | Height 0.75" | Depth 96"

Inside corner molding that comes in an 8 foot strip.