Portland Sand

Glass doors for a wall cabinet that is 36"W and 12"H. Clear glass is included. The actual cabinet must be purchased separately.

Decorative door for the side of a 12"D by 12"H wall cabinet. **The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Width 37-3/4" | Height 46" | Depth 19-7/8"

Curved wood hood that can be trimmed on top, if needed. Measurements without moldings are 36"W x 19"D. The bottom apron measures 8"H and the total hood height is 46'". The top of the hood is 17"W x 9-1/2"D.

Width 17" | Height 2-7/8" | Depth 21"

Roll out tray to be used with a 21"W base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

Width 1-1/2" | Height 1" | Depth 96"

Shaker style light rail molding that comes in an 8 foot strip. Commonly used to hide lighting under wall cabinets.

Width 24" | Height 12" | Depth 12"

Wall diagonal corner cabinet that takes up 24" from the corner out, on each wall. This cabinet will not have any shelves.

Width 6" | Height 42" | Depth 12"

Wall cube cabinet with 7 cubes. This cabinet will be finished on the interior and can be installed vertically or horizontally.

Width 36" | Height 34-1/2" | Depth 24"

1 door blind base corner cabinet. The actual width is 36" however it will take up a minimum of 39" of wall space and can be pulled up to 42". This cabinet has 1 drawer and is reversible. The door/drawer width is 11-9/16, blind opening is 8-7/8. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.