Ready to Assemble Bathroom Vanities & Cabinets

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 96" | Height 9/16" | Depth .25"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Roll out tray for a 21" base cabinet. The drawer glides and wood finish for the roll out tray will be the same as the standard drawers for this collection. **Please note, if using with a partial overlay collection (Tribeca Shaker or Glazed Praline), order according to the width of a cabinet, for example, the 15" roll out tray fits a 15" wide base cabinet. For full overlay collections, order according to the width of the cabinet if the roll out is NOT being installed between the hinges. If it will be installed between hinges, order 1 size smaller (for example use the 15" roll out for an 18" wide base cabinet) and use included shims for installation so the tray clears the hinges when opening**

Roll out tray for any 24" deep by 30" wide cabinet. The drawer glides and wood finish for the roll out tray will be the same as the standard drawers for this collection. **Please note, if using with a partial overlay collection (Tribeca Shaker or Glazed Praline), order according to the width of a cabinet, for example, the 15" roll out tray fits a 15" wide base cabinet. For full overlay collections, order according to the width of the cabinet if the roll out is NOT being installed between the hinges. If it will be installed between hinges, order 1 size smaller (for example use the 15" roll out for an 18" wide base cabinet) and use included shims for installation so the tray clears the hinges when opening**

Width 33" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 36" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 30" | Height - | Depth 12"

Stem glass holder that is made of solid wood and mounts to the bottom of a wall cabinet and can be cut to fit smaller cabinets. It will hold 6 rows of glasses (if full 30" width is used). Once installed, it hangs down 1.75". This product ships pre-assembled.

Width 96" | Height .75" | Depth .25"

Shoe molding that can be trimmed to desired height and/or width.

Width 96" | Height 0.75" | Depth 0.25"

Scribe molding that comes in 8 ft long sections. It can be used behind light rail molding when wrapping around the side of a wall cabinet.

Width 36" | Height 96" | Depth .25"

1/4" thick stained panel. Grain runs up and down if the panel is stood up tall (making it 96" high and 36" wide). This panel comes finished on one side.

Width 9" | Height 34.5" | Depth 24"

Tray base cabinet that has no shelves with a door opening that measures 5-7/8" W x 26-7/8" H.

*Please note that new cabinet inventory (hinged on either the left or right), is going to be replacing the current 'universal' cabinet inventory. During this transition period, if a Left or Right option for this cabinet is selected, but not yet available, you will receive one of the universal bases, which can be hinged either Left or Right, after delivery, on site.*

Width 3" | Height 96" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width and has toe kick notch on bottom. This filler will be finished on the front, back and sides, but not the top or bottom.