Graphite Grey Shaker - Quick Ship

Width 30" | Height 84" | Depth 24"

Wall pantry cabinet that has 4 butt doors. It has 1 stationary and 5 adjustable shelves. Top doors are 29"H and bottom doors are 49-1/4"H. There will be a decorative horizontal stile in the middle of each bottom pantry door.

Width 30" | Height 34.5" | Depth 24"

2 door sink farm sink base cabinet with a trimmable top opening as needed.

• Will fit a sink up to 27"W x 10"H
• Butt doors measure 19"H
• Top of the doors to the top of the cabinet is 10-1/2"H
• Opening height is 7"
• Farm sinks taller than 10" would require a custom built farm sink using a 24" refrigerator cabinet (please contact customerservice@thertastore.com if your farm sink is taller than 10")
• If your farm sink is 27"W, L-brackets (used to replace the wooden corner supports) should be selected from the options drop down area. These are not needed for farm sinks less than 27"W.

Width 30" | Height 34-1/2" | Depth 21"

Vanity that has 1 false drawer front, no shelves and 2 butt doors.

Width 24" | Height 34-1/2" | Depth 21"

3 drawer bathroom vanity base cabinet that has one 6-1/4"H drawer on top and two 11-1/8"H drawers on bottom.

Width 9" | Height 34.5" | Depth 24"

Base tray cabinet with 1 full height door and no shelves.

Width 9" | Height 30" | Depth 12"

1 door wall cabinet that comes with 2 shelves.

Width 9" | Height 36" | Depth 12"

1 door wall cabinet that comes with 2 shelves.

Width 9" | Height 42" | Depth 12"

1 door wall cabinet that comes with 3 shelves.

Width 12" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-1/4"H, bottom 2 drawer fronts are 11-1/8"H.

Width 12" | Height 34.5" | Depth 21"

3 drawer bathroom vanity base cabinet that has one 6-1/4" high drawer on top and two 11-1/8" high drawers on bottom.

Width 12" | Height 34.5" | Depth 24"

1 door base cabinet with 1 drawer and 1 shelf.

Width 11.5" | Height 11" | Depth .75"

Wall decorative end panel for the side of a 12" high wall cabinet.*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*