Pre-Assembled Laundry Room Cabinets

Width 30" | Height 18" | Depth 12"

Wall appliance cabinet that is meant to sit on the countertop to hide appliances.

Width 30" | Height 30" | Depth 12"

Wall blind cabinet with 2 adjustable shelves and a 7" stile. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 33" of wall space. Door width is 14-3/4" and the blind opening is 7-3/4" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 30" | Height 36" | Depth 12"

Wall blind cabinet with 2 adjustable shelves and a 7" stile. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 33" of wall space. Door width is 14-3/4" and the blind opening is 7-3/4" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 30" | Height 42" | Depth 12"

Wall blind cabinet with 3 adjustable shelves and a 7" stile. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 33" of wall space. Door width is 14-3/4" and the blind opening is 7-3/4" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 36" | Height 34.5" | Depth 24"

2 drawer base cabinet. Each drawer front measures 14-5/8" high.

Width 3" | Height 36.5" | Depth 3"

Decorative post. The top smooth portion is 4" high and the bottom smooth portion is 6" high.

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.