Glazed Praline

Width 30" | Height 30" | Depth 18"

Microwave cabinet that has an opening dimension of 26-7/8"W x 18-1/2"H and a shelf depth of 20". There are no upper shelves behind the doors above the opening. *Please note this cabinet has a depth of 18"*

Width 30" | Height 36" | Depth 18"

Microwave cabinet that has an opening dimension of 26-7/8"W x 18-1/2"H and a shelf depth of 20". There are no upper shelves behind the doors above the opening. *Please note this cabinet has a depth of 18"*

Width 30" | Height 42" | Depth 18"

Microwave cabinet that has an opening dimension of 26-7/8"W x 18-1/2"H and a shelf depth of 20". There are no upper shelves behind the doors above the opening. *Please note this cabinet has a depth of 18"*

Width 30" | Height 15" | Depth -

Plate rack that holds 10 plates and can also be installed under a shorter wall cabinet.

Width 24" | Height 96" | Depth -

Refrigerator end panel that has a 1/2" thick panel with a 1-1/2"W filler on the front. This refrigerator end panel can be trimmed to desired height and may be used either left or right. This panel comes finished on both sides.

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 96" | Height 9/16" | Depth .25"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Roll out tray for a 21" base cabinet. The drawer glides and wood finish for the roll out tray will be the same as the standard drawers for this collection. **Please note, if using with a partial overlay collection (Tribeca Shaker or Glazed Praline), order according to the width of a cabinet, for example, the 15" roll out tray fits a 15" wide base cabinet. For full overlay collections, order according to the width of the cabinet if the roll out is NOT being installed between the hinges. If it will be installed between hinges, order 1 size smaller (for example use the 15" roll out for an 18" wide base cabinet) and use included shims for installation so the tray clears the hinges when opening**

Roll out tray for any 24" deep by 30" wide cabinet. The drawer glides and wood finish for the roll out tray will be the same as the standard drawers for this collection. **Please note, if using with a partial overlay collection (Tribeca Shaker or Glazed Praline), order according to the width of a cabinet, for example, the 15" roll out tray fits a 15" wide base cabinet. For full overlay collections, order according to the width of the cabinet if the roll out is NOT being installed between the hinges. If it will be installed between hinges, order 1 size smaller (for example use the 15" roll out for an 18" wide base cabinet) and use included shims for installation so the tray clears the hinges when opening**

Width 33" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 36" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.