Salem White

Width | Height | Depth

Quart of paint. The paint will need to be applied with a paint sprayer.

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .25" | Depth .75"

Simple scribe molding.

Width 3.75" | Height 6.5" | Depth 3.5"

Small decorative corbel. *Corbels are handmade and may feature inconsistencies in shape or form but these are not considered defects*

Width 96"

Small cove molding, when installed, it will be 2-1/8" high and will stick out from the cabinet 2-1/8".

Width 14.625" | Height " | Depth 22"

Small trimmable cutlery divider made of UV coated maple wood and a 3/8" plywood bottom. The dividers will be 3/8" thick, and the interior height is 1-3/8". ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 24" | Height 18" | Depth 12"

Appliance garage with a roll up, tambour door and is designed to fit under a 24" wide wall cabinet.

Width .75" | Height 34.5" | Depth 20.25"

Vanity desk leg that is 20 1/4" deep on top and 9" deep on bottom. Front flat section comes down 5" before the left slopes inward. The leg will have wood edge banding. Made of 3/4" thick veneered plywood.

Width 11.5" | Height 29.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 30"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 11.5" | Height 35.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 36"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 11.5" | Height 41.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 42"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 11.75" | Height | Depth

Set of 4 wainscot panels to be used on the exposed side of an 84" cabinet or accessory (pantry, oven cabinet, refrigerator panel, etc...). It will match the door style of the cabinets being ordered.