Belfast White

Width 27" | Height 42" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 34.5" | Depth .75"

Base filler. Both sides of the filler will be finished.

Width 3" | Height 30" | Depth 24"

Spice pull out to be used with a base filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" base filler must be ordered separately.

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet with 1 half depth adjustable shelf and 1 drawer.

Width 30" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 30" | Height 34.5" | Depth 24"

Farm sink base cabinet. Door heights are 17-1/2". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel will need to be cut on site to fit the sink and can be cut to accommodate a sink that's a maximum of 12" high.

Width 30" | Height 34.5" | Depth 24"

Sink base cabinet with 2 doors and 1 false drawer front. This cabinet will have no shelves.

Width 30" | Height 1.25" | Depth 12"

Stemware rack that has 7 slots for glasses.

Width 30" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (1) 17-1/2" wide door on the left, (1) 6-3/4" high false drawer front across the top of the entire cabinet, and (2) 11-1/2" high drawers on the right. This cabinet will not have any shelves. To reverse the doors and drawers, choose the 'Drawers on Left' option.

Width 30" | Height 34.5" | Depth 21"

Vanity sink base cabinet with 2 doors and 1 false drawer front. This cabinet will not have any shelves.

Width 3" | Height 30" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**