Signature Vanilla Glaze

Width 33" | Height 90" | Depth 24"

Oven cabinet with 2 doors on top of the oven opening and 1 drawer on bottom. The oven opening measurements are as follows: 42"H x 24"W. The doors will match the height of the doors on a 33x18 wall cabinet and the drawer front will measure 11-1/4"H x 33" W. The cutout can be widened on site to a maximum width of 30", and height of 53", if needed.

Width 33" | Height 96" | Depth 24"

Oven cabinet with 2 doors on top of the oven opening and 1 drawer on bottom. The oven opening measurements are as follows: 42"H x 24"W. The doors will match the height of the doors on a 33x24 wall cabinet and the drawer front will measure 11-1/4"H x 33" W. The cutout can be widened on site to a maximum width of 30", and height of 53", if needed.

Width 36" | Height 96" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 42" | Height 34.5" | Depth 24"

2 door sink base cabinet that comes with 2 false drawer front and no shelves. This cabinet does have a center stile and a full 1/2" back.

Width 48" | Height 34.5" | Depth 21"

Bathroom vanity that has 4 doors, 1 drawer on far left, 1 drawer on far right, and a fake drawer front in the middle. There will be no shelves with this cabinet.

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 4.5" | Depth 27/32"

Crown molding with egg and dart detail. Installed height will be 3 5/8" and installed depth will be 2 27/32" (how far out it will extend from the cabinet).

Width 14 3/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 30" base cabinet or sink base cabinet.

Width 16 1/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 33" base cabinet or sink base cabinet.

Width 17 3/4" | Height 22 3/8" | Depth "

Set of lattice doors to replace the doors on a 36" base cabinet or sink base cabinet.

Width 5" | Height 30" | Depth 11.5"

Wall end shelf cabinet with 2 open non-adjustable shelves. The top and bottom panels will have squared corners and the adjustable shelves will have rounded corners. This cabinet is reversible.