Three 94" wall rails with fasteners, 24 cabinet brackets with fasteners and decorative caps, cabinet bottom fasteners, rail and cabinet shims, SnapToggles, drill bits and driver bits.

Eazy Wall rail hanging kits: A kit includes: A stock length wall rail and rail screws, cabinet bottom screws, cabinet brackets with short/long screws and Tee-nuts, plastic snap cap Tee-nut covers, plastic horseshoe rail and cabinet shims, Snap-Toggles and a drill/driver pack.

Drill/driver pack: This installation tool pack consists of: 5/16 and 3/16 twist drill bits, a spade bit for the toggles, and #3 Phillips and #2 Square driver bits. The spade bit is packaged with the Toggles. One tool pack is included with each order.

Scribe mounting tape: This 1/32 thick, double-sided mounting tape is ideal for attaching scribe molding rather than having to nail it in place. It is available in 8 foot lengths.

EZ Bracket: A single cabinet bracket complete with a T-nut, 2 different length fasteners and a screw cover.

Figuring What To Order: Cabinet layouts are typically dimensioned in inches so you first need to calculate the total length in inches needed for each layout space rail and record this length. Then subtract 2 inches from each total length and select the corresponding rail kit or kits that provides this total length.

**Please note: there must be a space of at least 1-3/16" from the tops of the wall cabinets to the ceiling, to allow for the cabinets to be mounted on the rail**