Kingston Pearl Grey Shaker Sample Door
In stock
- SKU
- kingston-pearl-grey-shaker-sample-door
Description / Kingston Pearl Grey Shaker Sample Door
| Sample Door Shipping Time: | Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day |
| Shop this style RTA: | Click here to shop RTA Cabinets from this style |
| Cabinetry Shipping Time: |
Ships in 4-6 weeks |
| Style: | Shaker |
| Face Frame: | 3/4" solid hardwood |
| Door Frame: | 3/4" solid birch 5-piece panel door |
| Door Center: | Solid birch |
| Center Panel Beveled Edge: | Yes |
| Sides: | 1/2" plywood |
| Top & Bottom (Wall): | 1/2" plywood |
| Bottom (Base): | 1/2" plywood |
| Back Panel: | 3/16" plywood skin on a 1/2" plywood frame |
| Shelves: | 1/2" or 3/4" plywood shelves with matching veneer and edge banded finish (1/2" for 30"W cabinets and under, 3/4" for 30"W and over), plastic shelf clips |
| Base Cabinet Shelf Depth: | 16" |
| Drawer Box: | 3/4" solid hardwood, 5-piece drawer front, 5/8" solid wood, dovetailed drawer box with 1/2" plywood drawer bottom, polyurethane clear coated (will not need to be finished) |
| Drawer Glides: | Heavy duty, soft-close, undermount drawer glides with 77 lbs weight capacity |
| Base Corner Supports: | 90 degree heavy duty metal corner brackets |
| Overlay: | Full |
| Hinges: | Concealed, 6-way adjustable hinges with 105 degree opening angle and 65 lb weight capacity |
| Cabinet Interior: | Kingston Pearl Grey, ready to stain/paint |
| Center Stile: |
None |
| Assembly Method: | Nail/Screw/Staple/Glue |
| Finish: |
Kingston Pearl Grey - ready to stain/paint and then sealed/clear coated (polyurethane, or similar) prior to installation (drawer boxes are already polyurethane clear coated so will not need to be finished) *Recommended to blow the dust off cabinetry and parts, with an air gun, after delivery, prior to staining/painting, to ensure the best possible finish* |
| Toe Kick: | 1/2" plywood toe kick |
| Installation Rail: | 3"W, 1/2" installation rail on all cabinets, along all 4 sides. Wider cainets will also have another vertical rail in the middle. |
| Wall Cabinet Bottoms Finished (Exterior): | Kingston Pearl Grey, ready to stain/paint |
| CARB Compliant: | Yes |
| Door Hinges: | Hinges will needed to be installed, pre-drilled on both sides |
| Toe Kicks Included w/Base Cabinets: | Yes *please note that 8' pieces of toe kick need to be purchased for cabinets side by side, to hide gaps* |
| Sides Panels Finished: | Kingston Pearl Grey, ready to stain/paint |
| Installation/Designer Note: |
If installed directly against a wall or deeper cabinet/appliance, 1/4" space is recommended, scribe molding can be installed between the cabinet and the wall (or deeper cabinet), if needed. If not, the door may not be able to open a full 90 degrees. A larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
More Information
| Brand | TheRTAStore |
|---|---|
| Cabinet Shipping Time | 3-5 Weeks |
| Product Assembled | RTA |
| RTA Shipping Option | Sample Doors |
| Product Color | Pearl Grey |
| Product Lead Time | Ships in 2 to 5 weeks |
| Product Finish | Pearl Grey |
| Zoho Record ID | 3426375000647041602 |
| Average RTA Kitchen Cost | $3,000 - $4,000 (Based on 10x10 layout) |