Outdoor Cabinetry

Width 24" | Height 31.5" | Depth 1.5" (approx)

Finished back panel used to finish the back of a cabinet, not to be used on grill bases (**counter top note: the back panel adds 1" to the cabinet’s depth**). See the Vented Finished Back Panels for grill bases.

Width 24" | Height 35" | Depth 28"

1 full height door base cabinet with no drawers and 1 adjustable shelf. The hinges will be on the left side (door will open from the right). The legs and decorative pulls are included (legs will be installed on site).

Width 24" | Height 35" | Depth 28"

1 full height door base cabinet with no drawers and 1 adjustable shelf. The hinges will be on the right side (door will open from the left). The legs and decorative pulls are included (legs will be installed on site).

Width 24" | Height 35" | Depth 28"

Shelf that can be used with a 24" wide cabinet, locking shelf clips are included (1 shelf per order). Each cabinet will come with 1 shelf, more can be ordered here, if needed. 2 shelves would be able to fit in the cabinets while still leaving space for storage but note that adding additional shelves (beyond the 1 included) will decrease storage height in each section of the cabinet.

Width 24" | Height 35" | Depth 28"

1 door ventilated gas grill base cabinet with 1 false drawer front and no shelves. The hinges will be on the left side (door will open from the right). There is not a right hinge option for this cabinet. The legs and decorative pulls are included (legs will be installed on site). The cabinet will be ventilated on the floor and the back. The front panel can be cut for an appliance, on site for the best fit, up to 18" W x 9"H (not including the counter top).

Width 24" | Height 35" | Depth 28"

1 door sink base cabinet with 1 false drawer front and no shelves. The hinges will be on the left side (door will open from the right). The legs and decorative pulls are included (legs will be installed on site).

Width 24" | Height 35" | Depth 28"

1 door sink base cabinet with 1 false drawer front and no shelves. The hinges will be on the right side (door will open from the left). The legs and decorative pulls are included (legs will be installed on site).

Width 24" | Height | Depth

Stainless steel towel bar that can be mounted to the side of a cabinet to hold towels and light weight items.

Width 24" | Height 31.5" | Depth 1.5" (approx)

Vented finished back panel used to finish the back of a grill base cabinet (**counter top note: the back panel adds 1" to the cabinet’s depth**).

Width 28" | Height 35" | Depth 2.25"

Finished end panel used to support a counter top when an appliance is at the end of a cabinet run. The end panel is adjustable from 28" to 29", if needed. All visible sides will be finished. *Install note: use multiple end panels when there are two or more appliances next to each other, if there are appliances side by side, the finished end panel should be used on either side of each appliances (as a result, there may be 2 end panels side by side, in between 2 appliances)**

Width 3" | Height 31" | Depth "

.060 aluminum filler panel to be used with base corner cabinets to provide clearance with opening doors and drawers.

Width 27" (approx) | Height 31" | Depth .06"

Finished side panel that can be used to finish the left or right side of a cabinet (**counter top note: the cabinet width will not change when side panels are applied**).