Pre-Assembled Custom Paints

Width 54" | Height 2.5" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 12" | Height 34.5" | Depth 24"

1 full height door base cabinet with 2 shelves (shelves will not be included if roll outs are added).

Width 12" | Height 34.5" | Depth 21"

Full height door vanity base cabinet with (2) adjustable 15" deep shelves.

Width 2.5" | Height 41.25" | Depth .75"

Solid wood raised overlay filler. The outer edge will be rounded or beveled and will have glazing where applicable. The overlay filler needs to be mounted to a wall filler or column box (sold separately).

Width 11-7/8" | Height 47.5" | Depth .375"

Beaded panel that has notched sections so multiple panels can be interlocked together. Beads are 1-1/2" wide, center-to-center. The exposed finished area of the panel is 11-7/8" wide but the total width of the panel is 12-7/8".

Width 3" | Height 36.5" | Depth 3"

Decorative post. The top smooth portion is 4" high and the bottom smooth portion is 6" high.

Width 23.25" | Height 34.5" | Depth .25"

Base skin to be used on the exposed side of a base or vanity cabinet (can be cut to size, as needed).

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.