Tuscan Custom Color

Width 27" | Height 42" | Depth 15"

Corner wall cabinet with no door that is designed to be used with a glass door (sold separately). Cabinet will have a finished interior and 3 adjustable 1/4" thick glass shelves. It will take up 27" of wall space out from the corner on each wall.

Width 27" | Height 42" | Depth 15"

Diagonal corner wall cabinet with 3 adjustable shelves. This cabinet will take up 27" of wall space going out from the corner on each wall. This cabinet will have a partial overlay door to ensure it opens without hitting the adjacent cabinet, so there will be about 1-1/8" of face frame, visible on either side of the door. The distance from the front middle of the cabinet to the back middle of the cabinet is 27".

Width 27" | Height 42" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 34.5" | Depth 24"

Base column that can be trimmed on site if needed.

Width 3" | Height 34.5" | Depth .75"

Base filler. Both sides of the filler will be finished.

Width 3" | Height 30" | Depth 24"

Spice pull out to be used with a 3x30 filler (sold separately - see SKU WF330). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" filler (SKU WF330) must be ordered separately. An additional overlay or decorative filler can be installed on the 3" filler if desired (also sold separately).

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 30" | Height 34.5" | Depth 24"

Base microwave cabinet with (1) 9" high drawer on bottom. Opening will be 24"W x 12-1/2"H. It can be widened on site up to 28" W x 19"H, if needed. The space from the shelf to the top of the cabinet is 20".

Width 30" | Height 34.5" | Depth 24"

Base oven cabinet with a max cut out size of 28-1/2" x 28". Opening will be cut on site by the customer, after delivery (apply extra care when cutting the front panel to avoid damage to the frame and side panels).

Width 30" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 30" | Height 34.5" | Depth 24"

Farm sink base cabinet. Door heights are 17-1/2". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel will need to be cut on site to fit the sink and can be cut to accommodate a sink that's a maximum of 12" high.