Midtown Pistachio Green Shaker

Width 6" | Height 34.5" | Depth 24"

Appliance end panel with a 6" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 14.625" | Height " | Depth 22"

Small trimmable cutlery divider made of UV coated maple wood and a 3/8" plywood bottom. The dividers will be 3/8" thick, and the interior height is 1-3/8". ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 9" | Height 30" | Depth 12"

1 door wall cabinet that has 2 adjustable shelves.

Width " | Height 4" | Depth "

Roll out tray to be used in a 30" base cabinet or wall pantry (up to 4 can be used in a pantry). Interior height of tray is 3-1/4". The roll out comes with 80% extension, BLUM soft-close glides.. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 42" | Height 12" | Depth .75"

Arched Recessed panel valance that can be trimmed up to 3" on each side.

Width 12" | Height 30" | Depth 12"

1 door wall cabinet that has 2 adjustable shelves.

Width " | Height 4" | Depth "

Roll out tray to be used in a 36" base cabinet. The roll out comes with 80% extension, BLUM soft-close glides. Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 15" | Height 30" | Depth 12"

1 door wall cabinet that has 2 adjustable shelves.

Width 30" | Height 12" | Depth 12"

Wall cabinet that has 2 doors and no shelves.

Width 3" | Height 30" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 42" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 40-1/2€
• Front width: 35-7/8€
• Depth of 34-1/2€ section: 13-3/4€
• Depth of 29-7/8€ section: 4-1/2€
• Max fan size: 40-1/2€ x 13-3/4€
• Note that a blower is not included and must be purchased separately

Width 24" | Height 18" | Depth 12"

Wall cabinet that has 2 doors and no shelves.