Vail White Shaker Sample Door
In stock
- SKU
- Vail-White-Sample-Door
Description / Vail White Shaker Sample Door
The specifications below are for the kitchen cabinet associated with this door sample
| Sample Door Shipping Time: | Samples ship out same day before 12pm EST, Mon-Fri. After 12pm samples will ship out the next business day |
| Shop this style in RTA or Assembled: | Click here to shop RTA Cabinets from this style Click here to shop Pre-Assembled cabinets from this style |
| Cabinetry Shipping Time: |
Ships in 5-15 business days |
| Style: | Shaker |
| Face Frame: | 3/4" Solid Wood |
| Door Frame: | 3/4" Solid Wood |
| Door Center: | HDF (HDF is used to avoid cracking/warping) |
| Door Frame Width: | 2.375" |
| Sides: | 1/2" A-Grade plywood with wood veneer |
| Top & Bottom (Wall): | 1/2" A-Grade plywood with wood veneer |
| Bottom (Base): | 3/8" A-Grade plywood with wood veneer |
| Back Panel: | 1/2" Full back |
| Shelves: | 3/4 " A-Grade plywood with wood veneer |
| Base Cabinet Shelf Depth: | 1/2 |
| Drawer Box: | Solid Wood 17mm (close to 3/4") sides, Drawer bottom 1/2" plywood, Drawer length 21". Dovetail construction, Natural finish. |
| Drawer Glides: | Undermount, full extension with soft closing feature |
| Base Corner Supports: | Metal corner brackets |
| Overlay: | Full with butt doors |
| Hinges: | Concealed 6-way adjustable with Soft Closing Feature |
| Cabinet Interior: | Natural Finish |
| Center Stile: |
No center stile on cabinetry 24"W to 36"W |
| Assembly Method: | L-bracket |
| Finish: | Polyurethane finish |
| Toe Kick: | 1/2" Plywood (sides of the toe kicks will be unfinished) |
| Installation Rail: | None (there is a full back) |
| Wall Cabinet Bottoms Finished (Exterior): | Yes |
| CARB Compliant: | Yes |
| Door Hinges: | Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This) |
| Toe Kicks Included w/Base Cabinets: | Yes |
| Sides Panels Finished: | Yes |
| Installation/Designer Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
More Information
| Brand | TheRTAStore |
|---|---|
| Cabinet Shipping Time | 5-15 Business Days |
| Product Assembled | RTA |
| RTA Shipping Option | Sample Doors |
| Product Color | White |
| Product Lead Time | Ships in 5-15 business days |
| Product Finish | Vail White Shaker |
| Zoho Record ID | 3426375000025200157 |
| Average RTA Kitchen Cost | $2,000 - $3,000 (Based on 10x10 layout) |
