Natural Grey Shaker

This restrictor clip will prevent a cabinet door from opening more than 90 degrees (price is per clip and 1 clip is needed per hinge). *Please note, these are NOT compatible with the Salem, Vienna, Midtown, Union, Tuscan and Imperial cabinet collections. See sku BLUM-COMPACT-RES-CLIP-10PK for those collections*

Width 23" | Height 2.875" | Depth 21"

Roll out tray to be used with a 27" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

Width 29" | Height 2.875" | Depth 21"

Roll out tray to be used with a 33" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

Width 36" | Height 96" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 54" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 96" | Height 4" | Depth .75"

Crown molding. Installed height will be 3 1/8" and installed depth will be 2 5/8" (how far out it will extend from the cabinet).

Width 24" | Height 12" | Depth 12"

Wall diagonal corner cabinet that takes up 24" from the corner out, on each wall. This cabinet will not have any shelves.

Width 30" | Height 34.5" | Depth 24"

2 drawer base cabinet.

Width 36" | Height 34.5" | Depth 24"

2 drawer base cabinet.

Width 38-3/8" | Height 22" + 30" | Depth 20-1/2"

Wood range hood with no decorative rail. The top 30" is trim-able if needed. The hood is 38-3/8" at widest point of base. This is for an actual hood, not a hood cover and a separate liner and blower will be needed.