Providence Natural Grey

This restrictor clip will prevent a cabinet door from opening more than 90 degrees (price is per clip and 1 clip is needed per hinge). *Please note, these are NOT compatible with the Salem, Vienna, Midtown, Union, Tuscan and Imperial cabinet collections. See sku BLUM-COMPACT-RES-CLIP-10PK for those collections*

Width 23" | Height 2.875" | Depth 21"

Roll out tray to be used with a 27" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

Width 36" | Height 96" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 54" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 96" | Height 4" | Depth .75"

Crown molding. Installed height will be 3 1/8" and installed depth will be 2 5/8" (how far out it will extend from the cabinet).

Width 29" | Height 2.875" | Depth 21"

Roll out tray to be used with a 33" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

Use these special cylinders with your cabinet hinges when installing wall cabinets horizontally to allow the door to open with an upward motion and help it stay open with it's lifted. Can be used with any standard single door wall cabinet that is 15" to 21" in width. Price is for 2 hinges.

Width 5" | Height 30" | Depth 11.5"

Wall end shelf cabinet with 2 open non-adjustable shelves. The top and bottom panels will have squared corners and the adjustable shelves will have rounded corners. This cabinet is reversible.

Width 5" | Height 36" | Depth 11.5"

Wall end shelf cabinet with 2 open non-adjustable shelves. The top and bottom panels will have squared corners and the adjustable shelves will have rounded corners. This cabinet is reversible.