Midtown Hunter Green Shaker

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x96 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x30 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x36 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 5.5" | Height " | Depth .75"

Overlay filler to be used with a 6x42 regular filler (which must be purchased separately). Actual filler width is 5-1/2"

Width 3" | Height 34.5" | Depth 2.25"

Base plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width " | Height " | Depth "

Lazy susan accessory for a 24x30 diagonal wall cabinet. It will have an adjustable metal post and two 18" plastic trays. Trays will be 2" high. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width " | Height " | Depth "

Lazy susan accessory for a 24x36 or 24x42 diagonal wall cabinet. It will have an adjustable metal post and three 18" plastic trays. Trays will be 2" high. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height .25" | Depth .75"

Simple scribe molding.

Width 3.75" | Height 6.5" | Depth 3.5"

Small decorative corbel. *Corbels are handmade and may feature inconsistencies in shape or form but these are not considered defects*

Width 96"

Small cove molding, when installed, it will be 2-1/8" high and will stick out from the cabinet 2-1/8".