Midtown Indigo Shaker

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 34.5" | Depth 24"

Base column that can be trimmed on site if needed.

Width 3" | Height 34.5" | Depth .75"

Base filler. Both sides of the filler will be finished.

Width 3" | Height 30" | Depth 24"

Spice pull out to be used with a 3x30 filler (sold separately - see SKU WF330). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" filler (SKU WF330) must be ordered separately. An additional overlay or decorative filler can be installed on the 3" filler if desired (also sold separately).

Width 30" | Height 34.5" | Depth 24"

2 drawer base cabinet. Each drawer front measures 14-5/8" high.

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 30" | Height 34.5" | Depth 24"

Base microwave cabinet with (1) 9" high drawer on bottom. Opening will be 24"W x 12-1/2"H. It can be widened on site up to 28" W x 19"H, if needed. The space from the shelf to the top of the cabinet is 20".

Width 30" | Height 34.5" | Depth 24"

Base oven cabinet with an opening size of 24"W x 21" H. The opening can be widened on site to a max cut out size of 28-1/2"W x 28-1/8"H.

Width 30" | Height 18" | Depth 12"

Wall appliance cabinet that is meant to sit on the countertop to hide appliances.

Width 30" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 30" | Height 34.5" | Depth 24"

Farm sink base cabinet. Door heights are 17-1/2". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel will need to be cut on site to fit the sink and can be cut to accommodate a sink that's a maximum of 12" high.

Width 30" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).