Midtown Mocha Shaker

Width 1-1/2" | Height 34.5" | Depth 24"

Appliance end panel with a 1-1/2" stile on the front, the stile is finished on front face and 2 long edges. Panel is 1/2" thick plywood and is finished on 2 sides.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 6" | Height 34.5" | Depth 24"

Appliance end panel with a 6" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 36" | Height 34.5" | Depth 24"

Easy reach corner cabinet that will take up 36" from the corner out, on each wall. Center shelf is adjustable and soft close hinging isn't available with this cabinet. Once assembled, the door cannot be reversed, so be sure to specify left or right hinging (as if facing the cabinet).

Width 30" | Height 34.5" | Depth 24"

Farm sink base cabinet. Door heights are 17-1/2". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel will need to be cut on site to fit the sink and can be cut to accommodate a sink that's a maximum of 12" high.

Width 33" | Height 34.5" | Depth 24"

Farm sink base cabinet. Door heights are 17-1/2". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel will need to be cut on site to fit the sink and can be cut to accommodate a sink that's a maximum of 12" high.

Width 36" | Height 34.5" | Depth 24"

Farm sink base cabinet. Door heights are 17-1/2". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel will need to be cut on site to fit the sink and can be cut to accommodate a sink that's a maximum of 12" high

Width 18" | Height 28.5" | Depth 21"

File base cabinet with a drawer on top and deep file drawer on bottom. Height is 28-1/2". Interior top drawer height is 3", exterior file drawer height is 16-1/2" and the sides of the file drawer are 11-1/8" high. File rack is not included.

Width 24" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 24" |Height 2.5" |Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 30" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 30" |Height 2.5" |Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).