Tuscan Timber

Width 60" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (2) 14-3/4" wide doors and (1) 6-3/4" high false drawer front in the middle of the cabinet. There will be (3) functional drawers on either end of the cabinet, (1) 14-1/2"W x 6-3/4"H drawer on top and (2) 14-1/2"W x 11-1/4"H drawers on bottom. This cabinet will not have any shelves.

Width 6" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width " | Height " | Depth "

Decorative door. Size will be the same size as the door from a 21x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width " | Height " | Depth "

White plastic tilt out tray. 1 tray can be used in a 24" or 27" sink base, or 2 trays can be used in a 36", 39", 42" or 48" sink base.

Width 11.5" | Height 41.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 42"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width " | Height " | Depth "

Clear glass door for a 18x42 wall cabinet. The glass will be pre-installed.

Width 6" | Height 30" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 5 cubes that will have finished interiors.

Width 96" | Height 5.25" | Depth .625"

Base board molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 30" | Height 5" | Depth 21"

Vanity knee drawer that can be trimmed up to 24" if needed. The drawer front is 23-1/2" wide, then there will be 3-1/4" of trimmable space on either side of the drawer front. The interior height of the drawer is 2-1/2". It has side mounted, ball-bearing slides (not soft close).

Width 6" | Height 36" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 6 cubes that will have finished interiors.

Width 23.5" | Height 29.5" | Depth "

Wainscot base panel, to be used on the exposed side of a base cabinet. It will match the door style of the cabinets being ordered.

Width .75" | Height 96" | Depth 24"

Refrigerator end panel. Both 96" sides are edge-banded.