Lexington Cinnamon Glaze

Width 36" | Height 34.5" | Depth 21"

Vanity sink base cabinet with (2) 12" doors on the right and (2) 12" drawers on the left, there will be 1 fake drawer front across the top of the cabinet and no shelves.

Width 3" | Height 3" | Depth .375"

Decorative rosette block.

Width 24" | Height 7.5" | Depth 21"

Drawer for a vanity or desk area.

Width 30" | Height 7.5" | Depth 21"

Drawer for a vanity or desk area.

Width 96" |Height 24" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height 36" | Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" |Height 48" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 31.5" | Height 84" | Depth 24"

Oven cabinet which can be used for a single or double oven. The oven opening is 28-1/2" wide. It can be trimmed up to 3/4" on each side giving a total opening width of 30". If modifying for a double oven or microwave/oven combo, the (2) top drawers would need to be removed on site which will allow for a max oven opening height of 46-1/4". If more space is needed, the horizontal stile above the oven opening is 10" high, 8" can be cut off (making the stile 2" high), if needed. This will extend the max oven opening to 54-1/4".

Width 31.5" | Height 90" | Depth 24"

Oven cabinet which can be used for a single or double oven. The oven opening is 28-1/2" wide. It can be trimmed up to 3/4" on each side giving a total opening width of 30". If modifying for a double oven or microwave/oven combo, the (2) top drawers would need to be removed on site which will allow for a max oven opening height of 46-1/4". If more space is needed, the horizontal stile above the oven opening is 10" high, 8" can be cut off (making the stile 2" high), if needed. This will extend the max oven opening to 54-1/4".

Width 31.5" | Height 96" | Depth 24"

Oven cabinet which can be used for a single or double oven. The oven opening is 27-1/2"H x 30"W. If modifying for a double oven or microwave/oven combo, the (2) top drawers would need to be removed on site which will allow for a max oven opening height of 46-1/4".

Width 96" | Height .75" | Depth .75"

Outside corner molding. Commonly used to finish edges on islands or other areas.

Width 96" | Height 2" | Depth .75"

Ogee molding.