Artisan Walnut Shaker

Width 33" | Height 34.5" | Depth 24"

2 door base cabinet with 2 drawer and 1 shelf. There is no center stile on this cabinet.

Width 36" | Height 34.5" | Depth 24"

2 door base cabinet with 2 drawer and 1 shelf. There is no center stile on this cabinet.

Width 36" | Height 34-1/2" | Depth 24"

1 door blind base corner cabinet. The actual width is 36" however it will take up a minimum of 39" of wall space and can be pulled up to 42". This cabinet has 1 drawer and is reversible. The door/drawer width is 11-9/16, blind opening is 8-7/8. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.

Width 39" | Height 34.5" | Depth 24"

1 door blind base corner cabinet. The actual width is 39" however it will take up a minimum of 42" of wall space and can be pulled up to 45". This cabinet has 1 drawer and is reversible. The door/drawer width is 14-9/16”, blind opening is 11 7/8”. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.

Width 42" | Height 34.5" | Depth 24"

1 door blind base corner cabinet. The actual width is 42" however it will take up a minimum of 45" of wall space and can be pulled up to 48". This cabinet has 1 drawer and is reversible. The door/drawer width is 17-1/2”, blind opening is 14 7/8”. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.

Width 36" | Height 34.5" | Depth 24"

1 door diagonal corner sink base cabinet that takes up 36" of wall space from the corner out, on each wall. This cabinet only includes the cabinet front, toe kick and floor panel. For the complete cabinet, see product code BDCF36. This item should be installed between two cabinets, it cannot be used with an appliance directly on either side.

Width 36" | Height 34.5" | Depth 24"

1 door diagonal corner sink base cabinet that takes up 36" of wall space from the corner out, on each wall. The door is 14-3/4€ wide. This is for the entire cabinet, including 1 shelf. For only the cabinet front, toe kick and floor panel, see product code BDCF36K-FL.

Width 3" | Height 34.5" | Depth 0.75"

Base filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 34.5" | Depth 0.75"

Base filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 09" | Height 34.5" | Depth 24"

Base pull-out spice rack that comes with 3 shelves; one fixed shelf on bottom and two adjustable shelves. This cabinet will not have soft closing glides.

Width 0.625" | Height 4.5" | Depth 96"

Base board molding that comes in an 8 foot strip. Commonly used as a decorative molding around base cabinets or islands.

Width 48" | Height 34.5" | Depth 0.25"

Beaded board panel with glazing. Commonly used to give a beaded finished look.