Cambridge Saddle Glaze - Limited Stock

Width 25.5" (42" wall space on each wall) | Height 34.5" | Depth .75"

Corner sink base front and floor. Finished toe kick is not included. Once installed, this will take up 42" of wall space from the corner out, on each wall. These items should be installed between two cabinets, they cannot be used with an appliance directly on either side. To ensure proper installation, additional countertop support will be needed along the back wall and corner area. Additionally, a base support should be built on-site to provide adequate stability. Please note that hardware is not provided to attach this item to adjacent cabinets due to the flexibility and versatility of the item and how it could be used.

Width 3" | Height 34.5" | Depth 3"

Fluted Decorative Leg.

Width 96" | Height 3" | Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3" high.

Width 3.5" | Height 12" | Depth 9"

Modern styled corbel.

Width 3" | Height 34.5" | Depth 3"

Square decorative leg.

Touch Up Kit includes wax putty stick and 1 touch up marker.

Width 3" | Height 12.75" | Depth 5.875"

Traditional corbel.

Width 20.5" | Height 29" | Depth .75"

Vanity Decorative Door.

The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.

Width 36" | Height 34.5" | Depth 24"

2 door base cabinet with 2 full height doors and 1 shelf. A regular 36" base cabinet with a drawer will be shipped in addition to a full-height face frame and doors. The face frame, doors and drawer box that comes with the 36" cabinet can be discarded and the full height face frame and doors will be installed on the cabinet box.

Width 24" | Height 36" | Depth 12"

Wall diagonal corner cabinet that takes up 24" from the corner out, on each wall. This cabinet comes with 2 shelves.

Use these special cylinders with your cabinet hinges when installing wall cabinets horizontally to allow the door to open with an upward motion and help it stay open with it's lifted. Can be used with any standard single door wall cabinet that is 15" to 21" in width. Price is for 2 hinges.

Width 42" | Height 34.5" | Depth 21"

Vanity that has 3 drawers on either end and 1 door in the middle, with a false drawer front above the door. The door and false drawer front measure 17 5/8"W. The door is 22 1/2"H and the false drawer is 6 1/4"H. For the 6 functioning drawers, the 2 top drawers are 11 1/2"W x 6 1/4"H, the bottom 4 drawers are 11 1/2"W x 11 1/8"H. Interior top drawer dimensions are 8 1/2"W x 3 3/8"H x 18"D, bottom drawer interiors are 8 1/2"W x 8 1/4"H x 18"D.