Harbor White

Width 36" | Height 34-1/2" | Depth 24"

2 door farm sink base cabinet. The top front panel will need to be cut on-site for the farm sink. The panel measures 35-7/8"W x 12-1/2"H x 3/4"D and a minimum of 3/4" should be left on each side of the panel. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*

Width 36" | Height 34-1/2" | Depth 24"

3 drawer range base cabinet with 1 false drawer on top. All drawer fronts will be 7-1/2" high. Finished end panels are required for exposed sides.

Width 36" | Height 20-1/8" | Depth 24"

2 door 24" deep stacker wall cabinet with no shelves. Finished ends are required for exposed sides.

Width 96" | Height 1-3/4" | Depth 1-13/16"

Angeled crown molding. Once installed, the molding will stick out from the cabinet about 1-13/16", and will be about 1-3/4"H. Support molding (sku: SPM2) is required for use with all crown moldings to secure to the cabinet.

Width 96" | Height 3" | Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3" H. Support molding (sku: SPM2) is required for use with all crown moldings to secure to the cabinet.

Width 96" | Height 2-1/2" | Depth 2-1/8"

Cove crown molding. Once installed, the molding will stick out from the cabinet about 2-1/8", and will be about 2-1/2"H. Support molding (sku: SPM2) is required for use with all crown moldings to secure to the cabinet.

Width 96" | Height 3-3/8" | Depth 2-3/4"

Large cove crown molding. Once installed, the molding will stick out from the cabinet about 2-3/4", and will be about 3-3/8"H. Support molding (sku: SPM2) is required for use with all crown moldings to secure to the cabinet.

Width 96" | Height 3" | Depth 3/4"

Crown extension molding. Support molding (sku: SPM2) is required for use with all crown moldings to secure to the cabinet.

Width 96" | Height 3/4" | Depth 2-1/4"

Support Molding is required for use with all crown moldings to secure to the cabinet.

Width 96" | Height 9/16" | Depth 13/16"

Shoe molding.

Width 96" | Height 4-15/16" | Depth 3/4"

Furniture Base Molding.

Width 15" | Height 34-1/2" | Depth 24"

1 full height door cabinet with a single trashcan pullout. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after deliver, in order to be flush with the door front, to give an inset appearance.*