Heather Grey Shaker

Width 96" Height 2.5" Depth .78125"

Crown molding that comes in an 8 foot strip. Commonly used to finish the top of wall cabinets. Once installed, the crown will stick out about 1-5/8" from the cabinet and the height off the cabinet will be about 1-7/8".

Width 0.75" | Height 0.75" | Depth 96"

Inside corner molding that comes in an 8 foot strip.

Width 1.5" | Height 1" | Depth 96"

Light rail molding that comes in an 8 foot strip. Commonly used to hide lighting under wall cabinets.

Width 1.5" | Height 2.25" | Depth 96"

Light rail molding that comes in an 8 foot strip. Commonly used to hide lighting under wall cabinets.

Width 0.25" | Height 0.75" | Depth 96"

Outside corner molding that comes in an 8 foot strip. Commonly used to finish edges on islands or other areas.

Width .75" | Height .25" | Depth 96"

Scribe molding that comes in an 8 foot strip. Width is 3/4" and it is 1/4" thick. Commonly used to fill small gaps between cabinets and walls. Curved edge will be smooth (there will be no actual ridges in the wood like shown in the schematic).

Width 0.25" | Height 4.5" | Depth 96"

Toe kick that comes in an 8 foot strip. Only the front will be finished, the back, top, bottom, and sides are all unfinished.

Width 24" | Height 34.5" | Depth 0.5"

Appliance end panel with a 3" return.

Width 3" | Height 34.5" | Depth 24"

Base column box (will come as one piece).

Width 48" | Height 34.5" | Depth 0.25"

Beaded board panel. Commonly used to give a beaded finished look.

Width 96" | Height 4" | Depth .75"

Crown molding with large cove detail. Installed height will be 3" and installed depth will be 2-3/4" (how far it will extend from the cabinet).

Width 3" | Height 36.5" | Depth 3"

Decorative full leg. The top flat section is 4" and the bottom flat section is 6-1/4". It is trimmable if needed.