Linen Shaker - Quick Ship

Width 42" | Height 34.5" | Depth 24"

2 door base cabinet with 2 drawers and 1 shelf. Cabinet has butt doors.

Width 39" | Height 34.5" | Depth 24"

1 door blind base corner cabinet that takes up a minimum of 42 1/2" of wall space and can be pulled up to 49". The actual cabinet width is 39" and has a minimum pull of 3 1/2" and a maximum pull of 10" from the corner. This cabinet has 1 drawer and is reversible. The door measurements are 15 7/8W x 22 1/2H x 3/4D. The drawer front measurements are 15 3/4W x 6 1/4H x 3/4D. The drawer box is 12 3/8W x 3 3/8H x 20 3/8D and the door opening is 12 3/4"W x 20 1/2"H. The stile between the door opening and blind opening is 10" wide. A filler must be installed between the blind cabinet and the adjacent wall cabinet (so it's perpendicular to the blind cabinet).

Width 11.5" | Height 41" | Depth .75"

Wall decorative end panel.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 42" | Height 96" | Depth .25"

Bead board finished panel (only finished on one side).

Width 42" | Height 96" | Depth .25"

Finished veneered panel, finished on one side.

Width 48" | Height 6" | Depth .75"

Shaker arched valance. The height in the middle of the valance is 3".

Width 6" | Height 42" | Depth .75"

6"x42" Filler.

Width 6" | Height 96" | Depth .75"

6"x96" Filler.

Width 96" | Height 1.75" | Depth 1.75"

Angled crown molding. Once installed, the molding will stick out from the cabinet about 1 13/16", and will be about 1-3/4" high.

Width 96" | Height 1" | Depth 2"

Angled light rail molding.

Width 96" | Height 4.9375" | Depth .75"

Base molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height 3.625" | Depth 3.5"

Cove crown molding. Installed height will be 3-5/8" and it will stick out 3 1/2" from the cabinet.