Stone Shaker - Quick Ship

Width 96" | Height 1.75" | Depth 1.75"

Angled crown molding. Once installed, the molding will stick out from the cabinet about 1 13/16", and will be about 1-3/4" high.

Width 96" | Height 1" | Depth 2"

Angled light rail molding.

Width 96" | Height 4.9375" | Depth .75"

Base molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height 3.625" | Depth 3.5"

Cove crown molding. Installed height will be 3-5/8" and it will stick out 3 1/2" from the cabinet.

Width 96" | Height 3" | Depth 2"

Crown molding. Installed height will be 3" and it will stick out 2" from the cabinet.

Width 96" | Height 1.1875" | Depth 1.5625"

Light rail molding.

Width 96" | Height .75" | Depth .25"

Scribe molding.

Width 96" | Height 4.5" | Depth .25"

Toe kick. This is required if any cabinets will be going side by side to cover the seams and cover the small gap from one cabinet to the next.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel. Finished on both sides. There is a 3" stile/filler on the front which can be trimmed to 3/4" if necessary.

Width 23.5" | Height 29" | Depth .75"

Base Decorative Door

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 23.25" | Height 34.5" | Depth .25"

Base veneered skin.

Width 3" | Height 34.5" | Depth 3"

Classic Decorative Leg.